2019 Land Pride DBM2660 Ditch Bank Cutter

Call for Price

Land Pride
DBM2660 Ditch Bank Cutter



Quickly reach inclines.

Land Pride's DBM2660 Ditch Bank Rotary Cutter enhances our growing line of Rotary Cutters. This new hydraulic-driven cutter boasts a number of features that will make mowing ditch banks, pond dams, or other hard to reach inclines fast, easy, nd efficient. Built for either 540 or 1000 RPM tractors, the DB2660 features a 58" cutting width, 1" cutting diameter, and 32" cutting reach. The ½" by 4" blades rotate clockwise at 15,000 fpm, directing debris away from the tractor. Minimum cutting height is dictated by the tractor’s 3-pt height.

  • Tractor HP Range: Designed for 75 minimum HP tractor with minimum weight of 7,000 lbs.
  • Gearbox HP Rating: 150 HP
  • 3 Point Design: Does not require a dedicated tractor. Three point hook up is easy to hook up and remove from tractor.
  • Cutter Deck Visibility: Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind.
  • Factory Assembled: Arrives ready for the customer, saves time and money. (Excluding gauge wheel options and fluids.)
  • Grease Ports: All grease ports are easily accessible for servicing.
  • 10' Transport: Width Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.
  • Extension Arm Design: One cylinder used to adjust extension arm horizontally 32" is easy to operate.
  • Long Horizontal Reach: Good access for reaching vegetation far away from the tractor.
  • Above Grade Vertical: Reach Good access for reaching up embankments and cutting low over hanging limbs.
  • Below Grade Reach: Good access for reaching down embankments.
  • 175 Degree Deck Rotation: Angle Cutter head can be positioned to reach different angles.
  • Cat. 2 & Cat. 3 with Quick Hitch 540 rpm or 1000 rpm: Fits a wide variety of tractors.
  • 35 Gallon Oil Reservoir: Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
  • 1" Cutting Capacity: Good for trimming brush.
  • High Blade Tip Speed: 15,600 FPM tip speed means cleaner cutting.
  • One Parking Stand: Easy to adjust 3-point hitch level for unhooking tractor.
  • In-line Filter: Cleans hydraulic fluid before it re-enters the reservoir.
  • Shut-off Valve: Permits maintenance with minimum oil loss.
  • Built-in Auxiliary Weight Rack on Left Side: Suitcase weights can be added to left side for balance. Able to choose the weight bracket to match various types of suitcase weights.
  • Oil Pressure Gauge: Easily monitor oil pressure for optimum performance of unit.
  • Pressure Relief Valve: Protects against high hydraulic fluid pressure.
  • Gauge Wheels Option: Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and/or deck.
  • SMV Mounting Socket (Standard):SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer.
  • SMV Sign (Accessory): SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade does not fit the cutter’s standard SMV mounting socket.
  • Tractor horsepower: 75 Minimum hp.
  • Minimum tractor lift capacity: 2,500 lbs
  • Minimum tractor weight: 7,000 lbs without added weights
  • Weight: 1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted speed increaser, & Case weight hanger. Without fluid in reservoir)
  • Hitch type: Cat. ll or Cat. ll/lll Quick Hitch. Clevis style lower hitch.
  • Tractor power take-off speed: DB2660 = 540 rpm; DBM2660 = 1000 rpm
  • Cutting width: 58"
  • Transport width, minimum: 10' - 1" (without gauge wheels), Overall width (fully retracted with, optional weight bracket) 10' - 3 3/4"
  • Minimum cutting height (Deck level): 2" Minimum, Maximum is dependent upon 3-point lift height.
  • Horizontal cutting extension: 32"
  • Maximum horizontal reach from center of tractor: 13’-2"
  • Deck rotation: 85o up, 95o down
  • Blade tip speed: 15,600 FPM
  • Number of blades & size: 2, 1/2" x 4"
  • Blade rotation: Clockwise
  • Blade bolt: 1 1/2" With keyway, harden flat washer, and locknut
  • Dishpan: 3/16" X 21" Round, dish-shaped
  • Cutting capacity: 1" Max.
  • Deck thickness: 10 GA
  • Side skirt thickness: 3/16"
  • Tractor mount Speed Increaser fluid capacity: Please Refer to metal tag on speed increaser for vendor name (BIMA or Comer). BIMA = 1 1/2 pints, Comer = 2 pints.
  • Ditch Bank mount Speed Increaser fluid capacity:BIMA = 2 pints, Comer = 1 pint
  • Speed increaser fluid: 80-90W EP Gearlube
  • Hydraulic fluid: Mobilfluid 424, For alternate fluids, search on the web for “Mobilfluid 424” or go to www.mobil.com
  • Reservoir capacity and filter: 35 Gallons / conventional 10 micron filter
  • Method to check oil capacity: Dipstick
  • Hydraulic fluid flow rae: 15 gpm (approx.)
  • Overload protection: Hydraulic relief valve
  • Driveline (optional): ASAE category 4
  • Skid shoes: 2 1/2" Wide x 1/4" thick & replaceable
  • Gauge wheel (optional): 4 x 8 Laminated tire with greasable caged roller bearings.
  • Gauge wheel adjustment: Manual
  • SMV Sign (Accessory): SMV decal on galvanized steel back sign and plated or galvanized blade mount.



Working Width
58 in.
10 ft. 1 in.
174 in. Retracted, 206 in. Extended
1,792 lb.
Recommended HP
75-150 hp

Related Products